The Down Range Forum

Member Section => Reloading => Topic started by: erdes on November 18, 2012, 11:41:27 AM

Title: ReLoading issues with the Freedom Arms .454 Casull
Post by: erdes on November 18, 2012, 11:41:27 AM

Has anyone encountered problems with reloading for their Freedom Arms Model 83? It seems the revolver chambers are speced so tight that full-length resized brass won't chamber properly.  Just curious if it's just me.

Title: Re: ReLoading issues with the Freedom Arms .454 Casull
Post by: TAB on November 18, 2012, 12:08:57 PM

 assuming its not a chrimp issue.  Have you checked to see if you are actually fully sizing your brass?  Often dies hit the shell plate and not allow a full size.   a little grindy, grindy and you are good to go.  Some die manufactors will do it for free.     to check to see if this is happening.  Take a mic and check the resized brass at several place on the brass.  Often its bigger at the base.