The Down Range Forum

Flying Dragon Productions ( Michael Bane ) => Shooting Gallery on Outdoor Channel => Topic started by: GlockAroundTheClock on February 02, 2014, 10:25:07 AM

Title: LC9 Custom Trigger
Post by: GlockAroundTheClock on February 02, 2014, 10:25:07 AM

Michael,
First time Blogger with a request, Was very interested in your custom trigger job for your LC9. Tried to find it in the videos. I thought it was shown on the Ladies Three Gun Episode, but didn't seem to be included on the posted video. Would you mind sharing that information again? Pics too, if you have any. I apologize if this is the wrong forum for this request.
ty,
GATC

Title: Re: LC9 Custom Trigger
Post by: oldkat69 on February 02, 2014, 11:02:20 AM

 8) My wife has the Galloway Precision kit in her Ruger LC380.  The 380 is the same action with a different top.  I highly recommned the kit.  I did not put the RTK trigger in yet as the trigger bar and springs were excellant in shortening the trigger pull.  It's no 1911 but atleast you don't pull off the target before the shot breaks.  Here is the link the Galloways.  Eric & Debbie will really take care of you!

http://gallowayprecision.com/ruger/lc9-and-lc380/

Here is the link to the videos. (Be sure to scroll down to the LC9/380 section)

http://gallowayprecision.com/how-to-videos/

I put the RTK trigger in my sister's Smith & Wesson Bodyguard 380.  It is very nice but not essential for the LC9/380

Title: Re: LC9 Custom Trigger
Post by: GlockAroundTheClock on February 02, 2014, 01:43:18 PM

Thank you!

Didn't realize that had some other modifications available too for the LC9; steel guide rods, magzine disconnect, all good stuff.