The Down Range Forum
Member Section => Tactical Rifle & Carbine => Topic started by: texcaliber on June 13, 2007, 05:58:51 PM
-
??? Howdy yall, I am looking for advice for upgrading a SRL95. I have always been a target-guy but am looking tward tactical for this one. Of course i am open to any and all opinions or advice. Thanks.
Tex
-
I am looking for advice for upgrading a SRL95.
AKS furniture...SRL95...
Are we talking Swedish furniture or Kodak cameras?
;D
-
Last AKS I saw was a rock and roller, sure you got your nomenclature right?
-
SLR95 is the Bulgarian made AK which has the milled, not stamped, reciever. Wrong site for cameras or living rooms chairs. And if i am not too ding dong about this the correct nomenclature for the non Russian AK variants is AKS but I have been wrong before. Thanks for your patitance folks. I am trying a new avenue after reading the post from 2HOW
2HOW
View Profile Email Personal Message (Offline)
new rifle
« on: June 11, 2007, 08:43:24 PM »
Reply with quote
perhaps we need some catagories? Her is my new rifle
AK RIFLES
NEW AK MODEL 75 T-6 TACTICAL RIFLE. 7.62X39
OUR NEW ROMAINIAN MODEL 75 T-6 TACTICAL RIFLE IS PROBABLY THE BEST AK RIFLE DEAL IN THE U.S. TODAY. EACH RIFLE SHIPS JUST LIKE THE PHOTO ABOVE, AND IS ENGINEERED FOR MAXIMUM PERFORMANCE. THE RIFLE INCLUDES THE FOLLOWING FEATURES. U.S. MADE T-6 SIX POSITION COLLAPSIBLE STOCK, U.S. MADE SAW TYPE PISTOL GRIP, U.S MADE GALIL TYPE FOREARM WITH VENTED HANDGUARD AND A U.S. G-3 THREE PIECE TRIGGER GROUP. THIS RIFLE ALSO SHIPS COMPLETE WITH A PRO MAG BRAND U.S. MADE POLYMER 30 ROUND MAG. THESE ARE NOT ONLY SHARP LOOKING BUT DURABLE. WE HAVE TESTED THEM AND THEY WORK GREAT. WITH THE U.S. MAG, THAT IS A TOTAL OF 9 U.S.MADE COMPLIANT PARTS. BUT UNLIKE SOME OTHERS, EVEN WITHOUT THE MAG YOU HAVE THE REQUIRED 6 PARTS MAKING THIS RIFLE FULLY 922r COMPLIANT AND LEGAL TO USE WITH ANY IMPORTED MAG OR DRUM. THESE RIFLES ALSO INCORPORATE THE POPULAR 45 DEGREE SLANT BREAK COMPENSATOR. THIS IS A SPECIAL PROJECT FOR US AND QUANTITIES ARE LIMITED , DON'T DELAY AK75-TACTICAL........$349.95
*NOTE- SOME FOLKS ARE OLD SCHOOL AND DON'T LIKE PLASTIC MAGS. IF THAT IS YOU, NO SWEAT. WE HAVE TESTED THESE MAGS AND REALLY LIKE THEM, BUT IF YOU HAVE AN AVERSION TO THE POLYMER MAG JUST LET US KNOW AND WE WILL REPLACE IT WITH THE STEEL RIBBED BACK 30 RD. MAG AT THE SAME PRICE. THIS RIFLE IS LEGAL EITHER WAY...
U.S MADE PRO MAG 30 RD AK MAGS (LIKE THE ONE ABOVE)........ $14.95 EA.Russian AK Siderail Mount W/Weaver Rail $39.95 $35.96
Click to enlarge
Just in! We are now offering these Russian side mount scope mounts with weaver top. These fit on the AK's, Saiga, Vepr, Dragunov's with the side rail mount on gun. This is the real thing, not a knock off!!
Click image to enlarge...
Enjoy faster target acquisition without breaking the bank. This affordable little beauty gives you 4 reticle options and a wide field of view... suitable for fast target acquisition on stationary and moving targets.
Reticle choices include: 3" M.O.A. dot, crosshair, circular 10" M.O.A. dot crosshair and 65" M.O.A. circle with 3" M.O.A dot
Tubeless design with 33mm reflex lens aperture. F.O.V. @ 100 yds. is approx. 52'
Parallax-corrected, unlimited eye relief
1X power
Allen head screw windage and elevation adjustments with locking screw
Built-in integrated rail mount fits standard bases, no need to re-zero when remounting
Waterproof and shockproof
Uses common 3V lithium battery (included)
Approx. 3 1/4"l., weighs just
l
[/u]
After checking the site out I want to mod. the SLR95 I already own. I do not like the guns furniture. Thanks
tex
-
Ok Tex I missread your post, so sorry. you want some goodies right try here I bought from them and great service and fast delivery.http://dpharms.com/?osCsid=48851d0ce1438b82331bb0e2c9e02994 also try Sportsmansguide.com all kinds of stuff. But if you go to a search engine and type in AK47 you will have many sites to choose and buy from GOOD LUCK ;D
-
thanks 2HOW, any setup that you would point me tward. I am as far from tactical as you can get but hope to change that soon. Thanks again for your time.
tex
-
I just put my order in with my shops gunsmith and after a long and almost painstaking process I made a choice. I went with a company call CAA(command arms accessories) and got the tri-rail handguard, and railed upper, tactical 6position stock with checkpiece. I will give yall a post range write up after the system goes through the ringer.
Now i just need a good tactical sling. Any suggestions?
tex
-
Maybe I missed this TEX, but what rifle did you buy? Good choice on the handguard rails.
-
No prob. 2HOW, I got the Bulgarian SLR95 in 7.62x39 which has a milled reciever and a better trigger than my AR. Although the AR is still more accurate. Wierd how that works. thanks
-
I would like to know which stock was on that Klieb AK on today Shooting Gallery show? It was a folder if that hel[ps yall.
tex
-
I noticed the side mount mentioned in the rifle description that HOW2 posted.
Can anyone point me in the direction of information on how to install that?
I picked one up at a gunshow a couple of months ago, expecting that it would screw in to the side or clamp down after sliding on the side of my Saiga.
However, it does not tighten. It lays loose, against the side of the receiver. I assume that some hardware was missing. Since it came with no instruction, I want to confirm that is the case before buying another.
Also can anyone confirm for me that I would not be able to use my iron sights if I were to install the tactical forearm with rails and mount a Aimpoint there?
Any help is greatly appreciated.
Thanks
-
shieldbearer428,If it is the kind with the flip clamp,it needs to be slid on from the rear,you must remove the flip clamp and loosen the tension screw,tap on the mount with a rubber mallet or wood from the back to front position,put the clamp back on and flip it tight to the front.Look closely to see the ridges align with the jaw of the mount and tap it forward until it seats and is aligned properly. I assume its the same with the 3 or 4 screw kind. hope this helps.
-
I appreciate the help 2HOW. I was able to get it installed on the Saiga shotgun. When we went back and tried putting it on, there was no problem. Originally, I was looking for something to catch the screws on. I didn't realize that tightening the screws all of the way would cause the metal on the mount to bend and pinch the rail. For the rifle I went with receiver cover with a rail mount.