The Down Range Forum

Member Section => Down Range Cafe => Topic started by: tumbleweedrancher on March 01, 2009, 08:33:07 PM

Title: pistal powder for reloading
Post by: tumbleweedrancher on March 01, 2009, 08:33:07 PM
been years since i reloaded getting back into it i used to use blue dot and heurculies powder just checking what is the latest buzz on which powder to use   i do a lot of plinking but also want for  self protection
i shoot 357 wheel and 9mm 45acp 
thanks
mike
Title: Re: pistal powder for reloading
Post by: alfsauve on March 01, 2009, 08:48:44 PM
Old standbys

H110 for full power .357 loads
Unique for .45ACP
Bullseye for those light .39spl target loads

In case you're interested, HS-6 and HS-7 for .40S&W

I could be persuaded to go all HS-6 for the autoloaders.  Just been with Unique for so long (30years) it's a hard habit to break.

Title: Re: pistal powder for reloading
Post by: CZShooter on March 01, 2009, 08:52:40 PM
What used to be Herculies is now Alliant. I use Bullseye and Power Pistol for my 9mm loads. FWIW...I would recommend not using reloads for self defense. The prosecutor will make you out to be the bad guy saying factory loads aren't powerfull enough for you that you had to load your own to be more devastating than what is commercially available. Etc...
Title: Re: pistal powder for reloading
Post by: tumbleweedrancher on March 02, 2009, 01:17:36 AM
i started out using unique only changed because blue dot took less grains meaning less powder swinging around
going everywhere on a progressive loader i'm planning on purchasing a second loader for the 45 so that way
you just set down load and go no reseting or messing around
thanks for the info on home defends round i do currently shot factory loads
mike
Title: Re: pistal powder for reloading
Post by: TAB on March 02, 2009, 02:44:36 AM
I like either win 231 or unique for all my pistol reloading

both would also work just find for light to moderate 357 loads.
Title: Re: pistal powder for reloading
Post by: hawkeye1 on March 02, 2009, 09:17:50 AM
For most of my everyday plinking and shooting, I use Wnchester 231.  Works great.  Recently came across an old can of Alcan 7.  Tried some of it in a 45 Colt.  Was very dirty.  think I will stick with the ol' 231.
Title: Re: pistal powder for reloading
Post by: D-Man on March 02, 2009, 09:24:53 AM
Universal Clays for almost all of my pistol loads.  Backup is regular Clays.  Works great in 9mm, 9x18mm, .38 special, .40 S&W, and .45 ACP.