The Down Range Forum
Member Section => Down Range Cafe => Topic started by: Hazcat on March 20, 2009, 04:59:09 PM
-
But y'all will have to get it out of him.
(HINT: It involves some COOL porn ;) )
-
Rastus it's Friday what better day for "porn" :o 8)
PLEASE ;D
-
at least it is not about Fairies heheh
-
Ok rastus ... I fessed up and posted the other day.
No holding out!
You've already got Haz ratting on you, and if you don't comply we'll get M'ette on it ;D
Give Damn It !!!
-
another hint:
Think Miami
oh, this is FUN!
-
Ok rastus ... I fessed up and posted the other day.
No holding out!
m58, I missed what it was that you fessed up to. What was it?
-
The hint (actually the answer) is on a post I just made under handguns. But...that's just the one....
Can't seem to make the digital camera work just yet...
-
I thought maybe his real name was Ron Jeremy ;D ;D
-
Fuzzdaddy,
You need to go over and check out the BHO inauguration celebration thread ;D
Rastus,
I went over and checked your other post, but I'll wait for the homemad porn ... Congrats and enjoy!
-
OK...here's the one. Note background...that's an actual signature.
(http://i603.photobucket.com/albums/tt114/RastusNR/100_4439.jpg)
(http://i603.photobucket.com/albums/tt114/RastusNR/100_4440.jpg)
-
Hey that photobucket ain't bad Haz. Here's side 2. If you hadn't pushed me I would not have fixed the camera (battery run down...had to move heaven and earth to find the charger).
(http://i603.photobucket.com/albums/tt114/RastusNR/100_4441.jpg)
(http://i603.photobucket.com/albums/tt114/RastusNR/100_4442.jpg)
-
OK Haz, do you remember what my other slip up was today? And for goodness sakes, ya'll don't tell my wife. Hint below:
(http://i603.photobucket.com/albums/tt114/RastusNR/100_4438.jpg)
-
Nice RASTUS!
I'd take either, or both, if you get in trouble ;)
-
You can keep 'em at my house (so the wife don't find out). ;D ;D ;D
-
Nice looking pistols, Did you get extra Mags with the Bren Ten, I understand they are hard to find. What Caliber is the Bond ?
-
Nice looking pistols, Did you get extra Mags with the Bren Ten, I understand they are hard to find. What Caliber is the Bond ?
No extra mags...just the one and the instruction book. Bond...it's in the .45 Colt/.410 chambering.
-
HAVE YA SHOT UM YET?????????
RICHARD
-
Only the Bond. The Bren...I might just wait a bit on.
-
Only the Bond. The Bren...I might just wait a bit on.
You have to love a Bond. I've had great luck with mine in .357. How did yours do with the .45LC ?
fightingquaker13
-
They look good Rastus. Big and little brothers. ;D
-
You have to love a Bond. I've had great luck with mine in .357. How did yours do with the .45LC ?
fightingquaker13
I only dropped a few rounds through it so the jury is out. One thing for sure....I'm no Bob Munden.
-
I only dropped a few rounds through it so the jury is out. One thing for sure....I'm no Bob Munden.
Who is? Mine's plenty accurate enough, but I'm still trying to get the draw and cock thing working. I will say that dropping the 70 dollars for the extended grip makes a difference. Being able to have 3 fingers on the grip helps with muzzle flip, and the grip has a wood backstrap which I found helps deaden recoil. (It still ain't all that fun with .357 loads though.) The trigger is a bit finicky also. You need to just use the pad of your finger and push down rather than pull back. It makes a huge difference. Likewise make sure your hand isn't in contact with hammer or itincreases the trigger pull. The longer grips help here as well. I like the gun, its just cool, plus it dissapears in your pocket.
fightingquaker13
-
My trigger pull seems to be a problem. Maybe there's some trick to it I haven't found yet, but it's a bear to touch off. After I get the trigger thing straightened out I'll have to see how it does.
-
My trigger pull seems to be a problem. Maybe there's some trick to it I haven't found yet, but it's a bear to touch off. After I get the trigger thing straightened out I'll have to see how it does.
Once you get he pushing down rather than pulling back thing down it gets a lot easier, again watch the web or hand on the backstrap. I'd get a pair of el cheapo .410 snap caps and go from there.
fightingquaker13
-
RASTUS- Cool man. A Bren-Ten. WOW. I have always wanted to shoot one. Why are they not as popular as a CZ-75 or (Civilian market ownership)Beretta 92. I figure it should have that sort of fallowing. But for some reason I have never seen on the range or in real life for that matter.
That looks way cool man. And I like the Derringer too. I hope I get to go burn some ammo with you sometime.
-
Rastus, if you call Bond arms They should have a replacement hammer spring that will help with the trigger pull. Ask them about the "competition" spring for it.
Bond phone # 817-573-4445
-
RASTUS- Cool man. A Bren-Ten. WOW. I have always wanted to shoot one. Why are they not as popular as a CZ-75 or (Civilian market ownership)Beretta 92. I figure it should have that sort of fallowing. But for some reason I have never seen on the range or in real life for that matter.
That looks way cool man. And I like the Derringer too. I hope I get to go burn some ammo with you sometime.
Because they only made about 1500 of them, spare magazines were impossible to get and the company had major problems with finance and production, folded once, came back with new owners and folded again, Fortis will be the 3rd incarnation.
-
Rastus, if you call Bond arms They should have a replacement hammer spring that will help with the trigger pull. Ask them about the "competition" spring for it.
Bond phone # 817-573-4445
OOPS! I forgot to mention that I had one those. :-\ They do lighten the trigger pull by about a pound. Just let them do it for you They didn't even charge me as I was getting some other stuff and had told them I'd write them a testimonial because I liked the gun so much (its only like $6 though).They threw in a free polish job, my used gun looks like it came off the showroom. Very nice folks and they definately want you to be happy. I was impressed that the president of the company was answering the phone the day I called.
fightingquaker 13
-
OOPS! I forgot to mention that I had one those. :-\ They do lighten the trigger pull by about a pound. Just let them do it for you They didn't even charge me as I was getting some other stuff and had told them I'd write them a testimonial because I liked the gun so much (its only like $6 though).They threw in a free polish job, my used gun looks like it came off the showroom. Very nice folks and they definately want you to be happy. I was impressed that the president of the company was answering the phone the day I called.
fightingquaker 13
Might be because he's the chief, the cook, and the bottle-washer......just kidding. ;D ;D ;D
Sounds like good folks to do business with. This is good and timely info as I have been thinking about a Bond.
-
Might be because he's the chief, the cook, and the bottle-washer......just kidding. ;D ;D ;D
Sounds like good folks to do business with. This is good and timely info as I have been thinking about a Bond.
You've seen my concerns with it as far as speed.But as far as concealabilty and power (they offer it in 10mm and .44-.40 if youre man enough) its hard to beat. Accuracy after you learn its quirks (took me about a box) is more than minute of bad guy. The construction is what sld me though. The thing is built like a tank and as smooth as glass.It reminds me of a Blackhawk or a Python, no bs, all business, it just seems solid. The people are amazing too, the one bought I saw used on guntoker, I wasnt sure if it was a model that I could add a trigger guard to.Not wanting to have a .357 with no trigger guard riding loose in my front pocket (yes I'm a candy ass) I called Bond to ask, the guy actually went on line and checked for me. This on a used gun. You can't beat that. The fact that I can get a .22 barrel to practice with is also a plus. Not only cheaper, but the .357s are not a lot of fun to shoot in a derringer. Just my .02.
fightingquaker13
-
Rastus, if you call Bond arms They should have a replacement hammer spring that will help with the trigger pull. Ask them about the "competition" spring for it.
Bond phone # 817-573-4445
Thank you for the information. Getting back with you a bit late, but I will give them a call. I've been busy in and out the last few weeks.
Because they only made about 1500 of them, spare magazines were impossible to get and the company had major problems with finance and production, folded once, came back with new owners and folded again, Fortis will be the 3rd incarnation.
The mags were impossible when they were shipped...I think it has an EAA mag in it that I hope works fine. I wish I would have asked at the Tulsa Wannamacher's Gun Show yesterday...silly me. And I didn't see a Bren Ten in the place...but I only got to just under 2/3's of the show. From what VLTOR is saying...the Fortis should be a superior weapon.
Blaine Wilson with VLTOR Weapon Systems says the Fortis has another 6 to 12 months before they begin to go out their door in an email to me. I really appreciate them getting back like that. So...say September to late winter time frame. Gives me time to save up.
RASTUS- Cool man. A Bren-Ten. WOW. I have always wanted to shoot one. Why are they not as popular as a CZ-75 or (Civilian market ownership)Beretta 92. I figure it should have that sort of fallowing. But for some reason I have never seen on the range or in real life for that matter.
That looks way cool man. And I like the Derringer too. I hope I get to go burn some ammo with you sometime.
You know where I live. Maybe you can make the USSA Pro/Am and we can put some lead downrange there......anybody here got frequent flyer miles for Ksail to burn?
-
I think I'm in luuuuve...........
((Oh yeah.. and Rastus,, you probably aren't half bad yourself)) ;D ;D