The Down Range Forum

Member Section => Handguns => Topic started by: CJS3 on July 03, 2009, 07:13:58 PM

Title: Webley and Scott MkVI
Post by: CJS3 on July 03, 2009, 07:13:58 PM
I picked up my layaway from a local GS this week and took it to the range today. A Webley and Scott MkVI that was dated 1917 and had all the british army proofs intact, and all matching S/N's. The pistol had been converted from 455 british to 45ACP on moon clips. I used .45AR at the range. What was left of the ammo I got from TW and some reloads that I had on hand. The pistol, like my 1917 Colt, is heavy enough so that the recoil from the 45 ammo is negligible. Unlike the Colt, the trigger pull on the Webley was very nice. Single action pull was light and crisp, and double action fired groups were very acceptable at 15 yards. The Colt military trigger left no doubt that it wasn't a target pistol. The only complaint I had was that ejection of spent rounds was not always consistant. Sometimes the extractor would not come out all the way. That may have been an operator error so I'm not all that concerned. To break open the action, you had to grab the barrel with one hand and pull down as you release the catch. Not easy to do with a hot barrel.
Title: Re: Webley and Scott MkVI
Post by: tombogan03884 on July 03, 2009, 07:16:51 PM
 Interesting piece of history there CJS3
Title: Re: Webley and Scott MkVI
Post by: PegLeg45 on July 03, 2009, 07:18:52 PM
Glad it turned out well....... I've always wanted one just 'because'.
Title: Re: Webley and Scott MkVI
Post by: twyacht on July 03, 2009, 10:23:56 PM
Sounds like British engineering for the time.  Works when fired, reloading is a process.

Grabbing a hot barrel to open the action,... maybe that's why the Brits wore gloves all the time....

Title: Re: Webley and Scott MkVI
Post by: tommy tornado on July 03, 2009, 11:52:00 PM
Just curious if you are shooting reduced loads in that Webley or full power .45's?  I have heard that they don't stand up too well to full house .45.
Title: Re: Webley and Scott MkVI
Post by: CJS3 on July 04, 2009, 09:22:09 AM
Just curious if you are shooting reduced loads in that Webley or full power .45's?  I have heard that they don't stand up too well to full house .45.

I always use a reduced load for .45 Auto Rim. I use those instead of 45ACP on moon clips, because the moon clips are a pain to reload.
Title: Re: Webley and Scott MkVI
Post by: tombogan03884 on July 04, 2009, 09:26:45 AM
I always use a reduced load for .45 Auto Rim. I use those instead of 45ACP on moon clips, because the moon clips are a pain to reload.

Do you mean that putting the rounds into the clips is a pain ? I would think that reloading the revolver with the moon clips would be quite quick and easy. (If all the empties eject properly )
Title: Re: Webley and Scott MkVI
Post by: tommy tornado on July 04, 2009, 01:18:28 PM
I found a pen or pencil useful for removing spent cases for moon clips.
Title: Re: Webley and Scott MkVI
Post by: 1911 Junkie on July 04, 2009, 02:56:59 PM
I found a pen or pencil useful for removing spent cases for moon clips.

Or you could spend a few bucks and buy a de-mooning tool. (start jokes here)

If you are really cheap youcan make one yourself out of a piece of copper pipe.
Title: Re: Webley and Scott MkVI
Post by: PegLeg45 on July 04, 2009, 03:25:28 PM
Or you could spend a few bucks and buy a de-mooning tool. (start jokes here)

If you are really cheap youcan make one yourself out of a piece of copper pipe.


Would that be a belt?





Couldn't resist.    ;D
Title: Re: Webley and Scott MkVI
Post by: tommy tornado on July 24, 2010, 02:30:51 PM
CJS3, does your revolver's cylinder shake a bit when the hammer is not at full cock?  Mine does and I was just curious.
Title: Re: Webley and Scott MkVI
Post by: m25operator on July 24, 2010, 08:49:31 PM
Nice pick up cj, always wanted one, especially in that caliber. Thanks for sharing.
Title: Re: Webley and Scott MkVI
Post by: MAUSERMAN on July 30, 2010, 12:12:37 AM
Nice piece, Ive always wanted one but could never find one.
Title: Re: Webley and Scott MkVI
Post by: tombogan03884 on July 30, 2010, 01:31:57 AM
Or you could spend a few bucks and buy a de-mooning tool. (start jokes here)

If you are really cheap youcan make one yourself out of a piece of copper pipe.

 I'm not going to post the you tube commercial for "Crack Spackle".
I'm not.
Really.

Oh hell.  

Title: Re: Webley and Scott MkVI
Post by: Big Frank on July 30, 2010, 04:49:03 AM
Drift Much?  ;D
Title: Re: Webley and Scott MkVI
Post by: PegLeg45 on July 30, 2010, 04:53:25 PM
Drift Much?  ;D

 ;D
Title: Re: Webley and Scott MkVI
Post by: Combat Diver on August 01, 2010, 12:18:35 AM
CJS3,

  I've always enjoyed the Webleys.  Owned a Mk IV in .380/200 while in Germany and have found many Mk VI and Mk IVs in Iraq.  In 03' had about 6 unopened tins of .455 made in India dated in the 80s.  I did shot one cyclinder of .455 and it was a pussycat to shoot!  Here's some from Iraq in 08'.
(http://www.hunt101.com/data/500/medium/P3200176_British_revolvers_rz.JPG)
Enfield No2 Mk1 in .380/200 British (.38 S&W) made in 1932
Nickled Webley MkIV in .380/200 British
Webley MkVI in .455 Webley made in 1923

CC
Title: Re: Webley and Scott MkVI
Post by: CJS3 on August 01, 2010, 08:40:46 AM
CJS3,

  I've always enjoyed the Webleys.  Owned a Mk IV in .380/200 while in Germany and have found many Mk VI and Mk IVs in Iraq.  In 03' had about 6 unopened tins of .455 made in India dated in the 80s.  I did shot one cyclinder of .455 and it was a pussycat to shoot!  Here's some from Iraq in 08'.
(http://www.hunt101.com/data/500/medium/P3200176_British_revolvers_rz.JPG)
Enfield No2 Mk1 in .380/200 British (.38 S&W) made in 1932
Nickled Webley MkIV in .380/200 British
Webley MkVI in .455 Webley made in 1923

CC


Start a business! I'll be one of your best customers!