The Down Range Forum

Member Section => Reloading => Topic started by: tombogan03884 on August 26, 2021, 02:03:55 PM

Title: ODD QUESTION
Post by: tombogan03884 on August 26, 2021, 02:03:55 PM
Ian, on his Forgotten Weapons WEBSITE (not the YouTube channel) posted an STL file for a Roth Steyr stripper clip.

https://www.forgottenweapons.com/roth-steyr-1907-3d-printed-stripper-clips/


I printed a couple just to see and they came out well.
BUT,
I can not find a groove diameter for the extractor groove to check for fit.
I checked SAAMI, and a couple reloading guides, (Sierra, and Hornady)
I found every other dimension for the case EXCEPT the extractor groove.

If you NEED clips for your Roth Steyr let me know.
I can print up more.

I think    ;D