Author Topic: Milspin Custom U.S. ARMY Stainless Steel Bar Key  (Read 373 times)

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 8100
  • DRTV Ranger
  • Liked:
  • Likes Given: 359
Milspin Custom U.S. ARMY Stainless Steel Bar Key
« on: May 15, 2022, 12:55:18 AM »
Here are pics of the custom bar key I got from Milspin a few months ago and keep forgetting to post pictures of. I sent the pics to Sarge, my army roommate from 40 years ago to see if he had any questions or comments about it. He wrote back, If we can't fix it "modify it." The guy we called Joe Schmuck The Ragbag used to say, If it ain't broke we can't fix it. Sometimes there was nothing wrong with a weapon that came into the shop other than an operator malfunction so he came up with that saying. I told Sarge I didn't know who started that Never Again thing but it stuck with me ever since. He said was on the jacket he had made. A lot of guys I saw who were stationed in Korea had jackets with a Korean flag, the unit they were in, and the dates embroidered on the back. I remember the black jacket Sarge had but not what the picture was or the details of the writing. Sarge said our ******** CO didn't like it much, which made him like it that much more. :) Neither one of us liked Capt. Rat-Face Ray very much.

Another Sgt. we worked with was the one that said if you can't fix it modify it, but since I worked for Joe Schmuck I mostly remember what he said. 1979-1985 were the years I was on active duty. I also had some reserve time in 1979 in the Delayed Entry Program. They waited until I was 18 then put me on active duty and sent me to basic training in December.

The "Old Ironsides" insignia is the 1st Armored Division, which was where I spent over 2 years in Germany. The diamond is the symbol of the 5th Infantry Division (Mechanized) where I was stationed at Fort Polk before heading overseas. The 5th Infantry was the only division in the army other than the 101st Airborne that had colored shoulder patches on their fatigues instead of subdued like everyone else. But when the army switched from green fatigues to woodland camo BDUs, that was the end of all non-subdued insignia on combat uniforms. The Army Ordnance Branch Insignia, besides representing the Ordnance Corps, to me personally represents Aberdeen Proving Ground where I took my Advanced Individual Training. That's where I learned to repair small arms up to the 4.2" mortar, which fired a larger caliber projectile than the M60A1, M60A3, and M1 tanks in service back then.

If you order from Milspin through this affiliate link I get a kickback.  https://milspin.com/?rfsn=6113145.751722  If you order from Milspin, but not through that link, you're still doing business with a veteran-owned business started by two Recon Marine brothers running a small metal fab shop in Columbus, Ohio.  https://milspin.com/  They and other veterans they hired are making high end CNC milled products for people who are tired of mass produced low quality crap shipped here from overseas. I'll post pics of some of the other stuff I bought from them later. If I earn chump change as an affiliate I'll spend it on alcohol, or give it to the guys to spend on alcohol. They accept contributions to the Milspin beer fund. But if manage to get more than chump change I'm open to suggestions on where to donate it and will keep you informed when I do.

I think I mentioned before the 4.2" mortar was 107mm and the 105mm tank guns were only 4.1-something inch. I don't have it memorized down to the thousandth of an inch like Sarge does. But I remember they were M68 guns. I saw the barrel for one in a wooden crate once and I think it said the weight was 1,360 pounds. When the barrel needs to be replaced you take out a key that's held in by one or two socket head cap screws, give the barrel 1/4 turn with a big wrench, then pull it straight out. You have to take the bore evacuator off the barrel first so you can put it on the new barrel after you install it. The guys used an overhead crane in the old Luftwaffe hanger to pull barrels at the rear. But in the field they had to use a wrecker instead, like what I watched from on the tank once at Fort Polk. I still remember the time I hung from my belt on the crane and flew around until my belt buckle broke in half. :( Like Icarus, I dared fly too close to the sun. :-[
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 8100
  • DRTV Ranger
  • Liked:
  • Likes Given: 359
Re: Milspin Custom U.S. ARMY Stainless Steel Bar Key
« Reply #1 on: May 17, 2022, 07:56:29 PM »
In honor of police week, 35% off sitewide with discount code FSEAN all week. Don't say I never did anything for you. ;)
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 8100
  • DRTV Ranger
  • Liked:
  • Likes Given: 359
Re: Milspin Custom U.S. ARMY Stainless Steel Bar Key
« Reply #2 on: September 11, 2022, 12:59:18 PM »
Here's a still I grabbed from a video on Milspin's Instagram page. They just pulled a new Glock slide backplate out of the mill. Too soon?
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 8100
  • DRTV Ranger
  • Liked:
  • Likes Given: 359
Re: Milspin Custom U.S. ARMY Stainless Steel Bar Key
« Reply #3 on: September 11, 2022, 01:43:20 PM »
I forgot to post pics of my Milspin FJB Edition metal car badges, so here they are. First a pic of my ride, then a close-up of the driver side and passenger side doors. I took off my Denali baseball cap and snapped a pic of it too, just for the heck of it. It has a mesh back, but the mesh is also overlaid on the front of the cap and the top of the bill. I've never seen a cap like that before, and when I showed my friends, it was a first for them too. The south-facing driver-side door pic came out REALLY well IMO. Getting direct sun all day makes a big difference.

The metal car badges had 3M double-sided foam tape already installed, so all I had to do was peel, stick, and press down firmly to make sure they're permanently adhered. I didn't take any measurements at all. I just held the badges with my thumbs and forefingers, rested the back of my thumbs on the trim and said, yeah, that looks good enough, and slapped them on. I was having a hard time getting a good angle on the passenger side to take the picture, so I sat on the floorboard of my ATV. You can see part of the wheel lock on the front wheel in the reflection. There's another "Denver boot" type of wheel clamp on the other front wheel too.
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

 

SMF spam blocked by CleanTalk