home defense shotgun

[tfr270]

Well, I have an older 870 that I figured out I can modify to fit my needs. I don't mind the push button safety as I have one on my Marlin .30-30 and my 10-.22.
I'll post some before and after pictures. Basically I'll have replaced the 26" vent rib with an 18" cylinder barrel, the forearm with a tactical forearm, a short magazine extender, and a sidesaddle for reloads. The modification will only cost about 200 bucks, which will save me money over a new one that I can spend on shells and range time to practice with it.

[fightingquaker13]

I would like to remark, on the record for all those following this thread, that Hazcat sucks! I mentioned that I wanted a Mossberg, but I said I was staying clean as no lesser a figure than Maas Ayoob had assured me (via podcast) that I didn't need one. What did Haz do? Did he respect my my decision? No, he did not! Instead, he showed me the Mossberg Maverick line, essentially the same gun with fewer features at a lower price, thats what he did. Today, a forum member indicated that he wanted to sell one and I am now contracted to buy it and its ALL HAZ'S FAULT! Don't trust this guy he's evil. Pure evil, I tell you. 
FQ13 who will now go play with his DOG, and is recalling the remark of friend who once saw me handling used rods in a fly shop and remarked that I was so easy it was a good thing I wasn't a girl.

[1911 Junkie]

FQ13 who will now go play with his DOG SELF, and is recalling the remark of friend who once saw me handling used rods in a fly shop and remarked that I was so easy it was a good thing I wasn't a girl.

Fixed

Sometimes it's just not that challenging.

[fightingquaker13]

Fixed

Sometimes it's just not that challenging.

At least I didn't have to buy dinner or meet her folks.
FQ13

[garand4life]

Aren't the Mavericks made in Mexico? I haven't looked at them lately so I don't know.

Maverick is made in USA. Says it right on the gun.

[Sponsor]

[tombogan03884]

I would like to remark, on the record for all those following this thread, that Hazcat sucks! I mentioned that I wanted a Mossberg, but I said I was staying clean as no lesser a figure than Maas Ayoob had assured me (via podcast) that I didn't need one. What did Haz do? Did he respect my my decision? No, he did not! Instead, he showed me the Mossberg Maverick line, essentially the same gun with fewer features at a lower price, thats what he did. Today, a forum member indicated that he wanted to sell one and I am now contracted to buy it and its ALL HAZ'S FAULT! Don't trust this guy he's evil. Pure evil, I tell you. 
FQ13 who will now go play with his DOG, and is recalling the remark of friend who once saw me handling used rods in a fly shop and remarked that I was so easy it was a good thing I wasn't a girl.

The word you are looking for is "enabler" 

[fightingquaker13]

The word you are looking for is "enabler" 

Indeed! However garand4life got a better deal at his gundealer. Its one I would have jumped on with both feet and as our agreement was conditional anyway,I wish him the joy of his new mossberg (An even money swap from a maverick 88 with two barrels to a 500A. Who's going to say no that?). Anyway, I am now, thanks to Haz the enabler (thanks Tom) and Garand4life, the gun tease, back in the market for a used defensive shotgun at a reasonable price. If anyone is looking to thin the herd, PM me.
FQ13

[1776 Rebel]

Maverick is made in USA. Says it right on the gun.

The Mavericks are built down in old Mexico...

http://findarticles.com/p/articles/mi_m3197/is_n1_v34/ai_7396559/

So now and in the future the Mossberg Torreon operation will produce all Mossberg shotgun barrels and by March 1989 yet another plant will go on line at Eagle Pass, Texas -- some 200 miles southwest of San Antonio. The Eagle Pass operation will manufacture Mossberg's new pump action shotgun which will be known to the sporting world as the "Maverick" -- a pump shotgun destined to be well-constructed and will retail at a most competitive price that we understand will be difficult to match.

[garand4life]

By that article it says that barrels are made at the mexico plant but the Maverick gun it self will be made in Eagle Pass TX. Not 100% of the gun is made in the US. The barrels are made in Mexico. But the gun is still made here.

[1776 Rebel]

Garand, that article was from 1989 when they opened up the plant in Mexico. I found a more recent one which details better the current situation. Seems like most of the internals are made in Mexico. Shipped to Texas and put together. I believe the paper is the Del Rio News Herald from 2006...Either way they are fine guns for the price...


Maverick Arms to double its size in Eagle Pass
view
links
November 14, 2006
By Bill Sontag
Feature Writer


Maverick Arms leaders show off three popular Mossberg guns [picture], following a thorough factory tour of the plant in Eagle Pass. From left, Refugio “Cuco” Reyes, controller (with rifle and scope), Arturo Lopez, director of operations (with Turkish 12 gauge over-and-under shotgun), and Jesus Gutierrez, engineer and manager of quality control (with “high definition” camouflaged shotgun), comprise much of the management team for Maverick Arms. It’s been 17 years since Maverick Arms opened a 40,000-square-foot manufacturing plant in the Eagle Pass Industrial Park where virtually all O.F. Mossberg & Sons shotguns and rifles are produced.

Now, with outstanding response from a world firearms market, Maverick Arms is more than doubling the size of company operations here. It will doubtless increase the Eagle Pass workforce, according to Maverick Arms Controller Refugio “Cuco” Reyes, though he says the company has not announced details and numbers of anticipated employment plans.

Maverick Arms currently has 200 employees, and just last year it was 155, so the cadre is sure to climb when the new plant addition brings square footage to 85,000. With the current workforce, Maverick Arms produces approximately 245,000 shotguns and rifles each year, explained Gerardo Arturo Lopez, Maverick Arms director of operations, Friday (Oct. 27). That equates to about 1,600 guns built each workday.

But one unique trait of Maverick Arms is its standing as a “reverse maquila.” Whereas most maquiladora (“twin plant”) industries send small parts or components to Mexico for assembly, and return to the United States as completed products, Mossberg guns must reverse the process.

“In Mexico, it is not allowed to produce or buy guns,” said Lopez. So, for the Mossberg guns, parts – receivers, barrels, and stocks, for example – are produced in North Haven, Conn. and Torreon, Coah., Mexico, then shipped to Eagle Pass for assembly. The Maverick Arms plant also serves as the company’s primary shipping and distribution center.

The company is an exemplar of international trade, sending raw steel on flatbed trucks to Torreon, and receiving sealed containers of barrels, triggers and bolt assemblies on pallets in return. Receivers and stocks are produced in North Haven, and shipped to Eagle Pass to be married with parts from Mexico.

The Mossberg “Reserve” series guns are the showpieces of their line. This is the Silver Reserve 12 gauge over-and-under shotgun with 28-inch barrels with a fine gold-colored engraving over silver. The gun has five interchangeable chokes for maximum flexibility of hunting conditions.

Unfinished wood stocks are stained, varnished and polished in the Eagle Pass plant, but what Gutierrez calls a “high definition” treatment is applied, with film in a flotation chemical process, to plastic composition stocks. Essentially a wide variety of camouflage patterns in muted colors of grey, tan, brown and green, high definition is in high demand from customers with personal choices in mind. A simulated wood grain may also be applied with film in the same process.

Shotgun calibers produced here run the gamut from .410 gauge to 20 gauge, 12 gauge and 12 gauge magnum. Rifles produced in Eagle Pass include all calibers from a bolt-action .243 to 7mm. In addition, an estimated 18,000 guns each year are produced to satisfy Army and Navy contracts.

“High definition” camouflage lamination over stocks and barrels is a popular trend in some parts of the country, though not popular in Del Rio yet. The 835 Ulti-Mag Flyway series made in Eagle Pass is a 12 gauge shotgun that has an “overbored” and “ported” barrel to reduce muzzle jump and the sensation of recoil. Contributed photo/Mossberg

“There are a lot of our guns in Afghanistan and Iraq,” said Jesus Gutierrez, Maverick Arms manufacturing engineer and quality control manager. The armed forces shotguns are designed to handle high-capacity loads, all are pump action and finished with magnesium phosphate-treated steel. In addition, Maverick Arms also produces several lines of short-barreled guns for law enforcement contracts only.

Leadership team members at Maverick Arms are outwardly proud of their products. “‘More Gun For The Money’ is our company motto,” said Gutierrez. “We produce a very reliable product, but at an affordable price.”

The Mossberg Company marks its origin to 1919 with roots in tiny, palm-sized pistols before moving into long gun manufacture. A native of Sweden, Oscar Frederick Mossberg was born in 1866, and came to the United States 20 years later. The company has flourished, with tight requirements for precision and quality.

According to Gutierrez, all Mossberg and Maverick Arms guns feature a 10-year warranty, but Maverick Arms in Eagle Pass also manages a small group of gunsmiths who can perform all repairs to the company’s shotguns and rifles. They also customize guns to suit Mossberg patrons’ specifications.

Maverick Arms manufacturing plant and distribution center is a centerpiece of international trade in the Eagle Pass industrial park. The 40,000-square-foot facility will soon more than double in size to step up assembly and shipment of nearly all Mossberg guns. LIVE! Bill Sontag

lFor more information about Maverick Arms guns and rifles, see the Mossberg Web site at www.mossberg.com.


For more stories like this, see these categories: Business | News | November 2006 Issue