Show us your Reloading set up

[philw]

this is my current set up

I have it at my mates place  as  he is also using the press for his loading










I have a Lee Anniversary Pack it also came with the lee Powder measure. lee 303 2 die set ( I just brought off a mate RCBS 3 die set )
my 9mm dies are also RCBS. 
the scales are the same Ohaus  505's I believe they make the RCBS branded ones

when I put the new bench in my shed I want to get a new Reading or RCBS press   thinking of a turret style one  not sure if I need that though

also want to get some electric scales / powder thrower  and a case tumbler

[billt]

I've organized it a little better, and removed some of the clutter since these pics were taken.  Bill T.

[fullautovalmet76]

Here's my reloading room and press; see attached.

[fullautovalmet76]

this is my current set up

I have it at my mates place  as  he is also using the press for his loading



I have a Lee Anniversary Pack it also came with the lee Powder measure. lee 303 2 die set ( I just brought off a mate RCBS 3 die set )
my 9mm dies are also RCBS. 
the scales are the same Ohaus  505's I believe they make the RCBS branded ones

when I put the new bench in my shed I want to get a new Reading or RCBS press   thinking of a turret style one  not sure if I need that though

also want to get some electric scales / powder thrower  and a case tumbler

Phil,
How do you use the laptop with your reloading?

[ericire12]

I'm confused, but is this porn

[Sponsor]

[philw]

Phil,
How do you use the laptop with your reloading?

I have a spreadsheet set up for the load data I am using at that time

that day I also was on ADI's web site to get the load data for the powder weights  as I did not have it printed off


+ i had DRTV podcast playing while loading  ( I had a couple of shows to catch up on. )

[alfsauve]

I need to clean up the bench and take some current pictures.   But I do have some closeups of a couple of neat things on my bench.

The first is the clamp for the powder measure.   Dumping the measure was always a pain.  This makes it so easy.  Just loosen the wing nuts and slide the measure out.



The second is a "penny rail" (it goes by many names but that's one name used in theatre).  It keeps bullets and brass from rolling off the table.  Mine is from some strips of 3/4" double sanded ply slightly wider than the table is thick. 

[CJS3]

This is as clean as my bench gets.

[Pathfinder]

I'm confused, but is this porn

Yes, but maybe kinkier than you're used to. Think of it as a fetish!   

[Pathfinder]

Question - One of the last things I need before getting into reloading is a tumbler and media separator. Any recommendations? Besides something on sale? ?