« previous next »
Pages: [1]   Go Down

Author Topic: AR-15 Build  (Read 5616 times)

Ironhawk

  • Forum Member
  • **
  • Posts: 35
  • Liked:
  • Likes Given: 0
AR-15 Build
« on: May 02, 2009, 03:34:51 PM »
So this is what I have going on so far.

Spikes Tactical stripped lower.
     I am really happy with this lower.  It's solid, no marks or blemishes.  The spider logo is awesome, and even though you could beat the Fire/Safe color fill with Bullet markings that are colored filled, I'll still take this.

Pachmayr Vindicator Grip
     I love this grip!  It's extremely comfy, with just a wee bit of squishy.  And it feels solid.  Goes on in two pieces as you can see. 

Mag-Level Pmags
     Gotta have pmags.  I'll have a FDE CTR stock, and FDE ladder covers to match eventually.  And I really wanted some grip tape on those bad boys.

PWS FSC556
     Despite all of the choices for brakes and flash hiders, I had to have the FSC556.  It demands attention, and it's effective.  It'll be a pleasure to shoot.
Logged
“No free man shall ever be de-barred the use of arms. The strongest reason for the people to retain their right to keep and bear arms is as a last resort to protect themselves against tyranny in government."   - Thomas Jefferson -

Ironhawk

  • Forum Member
  • **
  • Posts: 35
  • Liked:
  • Likes Given: 0
Re: AR-15 Build
« Reply #1 on: May 02, 2009, 03:37:33 PM »
Can't get all of these in one post...lol
Logged
“No free man shall ever be de-barred the use of arms. The strongest reason for the people to retain their right to keep and bear arms is as a last resort to protect themselves against tyranny in government."   - Thomas Jefferson -

Ironhawk

  • Forum Member
  • **
  • Posts: 35
  • Liked:
  • Likes Given: 0
Re: AR-15 Build
« Reply #2 on: May 02, 2009, 03:38:55 PM »
The last of 'em
Logged
“No free man shall ever be de-barred the use of arms. The strongest reason for the people to retain their right to keep and bear arms is as a last resort to protect themselves against tyranny in government."   - Thomas Jefferson -

blackwolfe

  • A Simple Man
  • Top Forum Member
  • *****
  • Posts: 1844
  • DRTV Ranger
  • Liked:
  • Likes Given: 0
Re: AR-15 Build
« Reply #3 on: May 02, 2009, 04:25:51 PM »
IronHawk
Looks like it is going to be a nice build.  What are you doing for an upper?
I'm building one also.  Got a S&W lower with a Rock River Arms lower parts kit.  Standard grip because I haven't decided on a different one.  I have either a RRA 6 position telestock or a Command arms telestock to choose from.  Been thinking maybe of getting a Magpul CTR or MOE stock instead.  I have a Tactical Solutions M4 style dedicated .22 upper I can put on it.  Building a .223 upper for it if the barrel ever comes in.  I have several on backorder.  Have a Bushmaster BCG that I got lucky and found at a reasonable price.  Have a no name upper receiver forged by Cardinal, but I don't know who cut it.  Would like to find a different stripped upper.  For now I'm just going with standard upper firniture.  If the barrel ever comes in it's ready to assemble.  I never had much interest in these untill last fall although I have had a Rock River for a few years.  Now I have a couple, but this is my first build.  Have also picked up a few tools and how to books.  Keep us posted on your build.     
Logged
"We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution, but to overthrow the men who pervert the Constitution. "    Abraham Lincoln
 

Wolfe

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 11230
  • DRTV Ranger
  • Liked:
  • Likes Given: 1543
Re: AR-15 Build
« Reply #4 on: May 02, 2009, 05:00:58 PM »
Nice lower. I have the Pachmayr grip on one of my ARs and like it a lot better than the standard grip. It had a seam running right down the middle of the finger grooves that I used a rat-tail file to smooth out. It's VERY comfortable. I have an Ergo grip on my other AR and I like it too. Both grips give you a longer LOP which is nice for big hands like mine.
Logged
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

Sponsor

  • Guest
Re: AR-15 Build
« Reply #5 on: Today at 09:25:34 PM »
Logged

fightingquaker13

  • Top Forum Member
  • *****
  • Posts: 11894
  • Liked:
  • Likes Given: 0
Re: AR-15 Build
« Reply #5 on: May 02, 2009, 06:12:55 PM »
Looks like a neat setup. Just out of curiosity, is there any disadvantage to building with a different upper and lower receiver rather than going with both from the same factory in terms of fit? I know they're supposed to be interchangeable, but I was wondering if the factory fit might be better or worse?
FQ13
Logged

1776 Rebel

  • Guest
Re: AR-15 Build
« Reply #6 on: May 02, 2009, 06:49:52 PM »
Ironhawk, what are you going to fill the stripped lower with? A std factory parts kit or a competition trigger system?
Logged

Ironhawk

  • Forum Member
  • **
  • Posts: 35
  • Liked:
  • Likes Given: 0
Re: AR-15 Build
« Reply #7 on: May 04, 2009, 11:33:31 AM »
I bought a Del-Ton 16" Mid-Length Rifle Kit with Chrome line barrel, specter low-profile gas block, free float quad rail, FDE CTR Stock, T-marked Flat top and just standard trigger guts.

Every manufacturer is little different with their fit and finish.  There shouldn't be a problem with compatibility so long as both the lower and upper receivers are mil-spec.  I just chose to go this route because I could get the majority of the options/accessories that I wanted all at one time, as opposed to buying a rifle and then buying the parts I wanted.  That way tends to get a bit $$ after a bit.  So I fronted the some extra, initial, cash and I'll save money in the long run.
Logged
“No free man shall ever be de-barred the use of arms. The strongest reason for the people to retain their right to keep and bear arms is as a last resort to protect themselves against tyranny in government."   - Thomas Jefferson -
Pages: [1]   Go Up
« previous next »
 

SMF spam blocked by CleanTalk