Scope Mounting Question

[Hazcat]

Hi Guys,

I have a Savage 111F that I am trying to mount a scope on.

Problem is a can't tell (even under magnification) what is used to get the plugs out of the predrilled holes on the reciever.  Is it an allen wrench or TORX or what?

HELP!

[texcaliber]

Call Savage or even check their site under FAQ;s

[Hazcat]

Got it.  REEEEAAAAAL little allen wrench.

[texcaliber]

good to know thanks Hazcat.

Good luck with the rest of it.

tex

[2HOW]

Dont forget the loc-tite.

[Sponsor]

[Hazcat]

Dont forget the loc-tite.

Yep, I used the blue grade.

[m25operator]

Hazcat, knew you could improvise, overcome and adapt. Blue loctite is my thread agent of choice. If you ever have trouble removing loctited screws, it lets go at about 300 degrees. A heat gun or even a soldering iron directly to the screw will make it let go, you will see it start to bubble out. I hope you never need this info, but you never know.

[Hazcat]

Hazcat, knew you could improvise, overcome and adapt. Blue loctite is my thread agent of choice. If you ever have trouble removing loctited screws, it lets go at about 300 degrees. A heat gun or even a soldering iron directly to the screw will make it let go, you will see it start to bubble out. I hope you never need this info, but you never know.

Thanks!  I'll remember.