I think I got a good deal...

[texcaliber]

I could put the call in Thursday between 12-2pm. I am in New England if the time differs for you. If you need my help let me know excatly what your question(s) are to be answered. Also make sure you include model number for me. I will most likely get back to you same day and will try to get you prices. Both armor and MSRP.

If there is anything else you need or that I have forgot, like SKU#s for you, let me know
tex

[garand4life]

I just need to know from SIG what parts would need to be ordered to convert a P226 from standard DAO to DA/SA. And I'm in OH so the time zone should be the same. I see that most everything appears to be on MidwayUSA for a decent price and they have the matching Nickel to go with this NYPD models look.

[garand4life]

I called SIG and he gave me part numbers but not an actual list so I am unable to compare online. But the price he quoted me was basically $100 with shipping. I know it will be a bit more if I order the matching nickel accented parts like the decocking lever and hammer but I don't know if that's necessary.  Any thoughts as to whether or not for the long term value if it's worth getting the nickel accented versions?

[Hazcat]

Call Midway and they should be able to tell you what all you would need and the prices.

[Pathfinder]

I called SIG and he gave me part numbers but not an actual list so I am unable to compare online. But the price he quoted me was basically $100 with shipping. I know it will be a bit more if I order the matching nickel accented parts like the decocking lever and hammer but I don't know if that's necessary.  Any thoughts as to whether or not for the long term value if it's worth getting the nickel accented versions?

I'm in favor of all black. I don't even like the so-called "two-tone" guns. But then, my Daddy raised me to nbe a minimalist when it comes to design and appearances.

[Sponsor]

[DonWorsham]

from this site http://www.glocktalk.com/forums/showthread.php?t=1172808

I'm replacing the parts needed to convert my Sig P226 DAO to SA/DA and just need to know if the hammer I'm going to order is the right one. I know my DAO gun now has a DAO trigger but I don't see anything marked on Top Guns site as far as DAO or DA/SA for the hammers.

 [update] 34221040 SIG Decocking Lever Spring - $3.95
  [update] 34260253 SIG Decocking Lever Bearing - P226, P228, P229, P239 - $7.95
  [update] 34221120 SIG Hammer Strut Pin - $3.95
  [update] 1200409 SIG Hammer - P220/225/226/228/229/245 Black - $46.95
  [update] 34221130 SIG Hammer Pivot Pin - $3.95
  [update] 34260100 SIG Decocking Lever - P226, P228, P229 BLUE - $3.95

Select a Delivery method:  USPS Priority Mail

  Subtotal: $70.70
 
Shipping: $9.95
 
Total: $80.65
 
 
 
 
 
 
 

[garand4life]

The customer service guy at SIG did not mention anything about a pivot pin, or a hammer strut pin. Other than that I got the same info finally from SIG. So now I don't know who to go by. I hate this part. Who do I believe? SIG says one thing then you get these forum gunsmiths who say another. I am more inclined to believe the manufacturer but having dealt with HP and Dell I know all to well that the manufacturer is usually filled with bozos who couldn't get a job at WalMart. Please, someone tell me which one is right...

[DonWorsham]

Call SIG back and ask.

[garand4life]

I feel bad for doubting SIG. I got the same guy and when I mentioned the 2 pins he almost sounded offended that I questioned his expertise. I do NOT need anything beyond the decocker it's spring and bearing and the new hammer. So I feel better now. I priced all of that out at OMBExpress.com for about $90 with shipping and that's with the matching nickel finish. I am still torn between going with the black finish but if I do then it means replacing the slide stop lever, take down lever, and mag release and trigger with black versions and that just seems silly. You can see above it is a nice looking gun as is. I figure since there are none of these NYPD models made in DASA it might be nice to keep the look but go for better function. I might later when I have extra cash do it myself to convert all the parts to the plain finish and make it a learning experience, or just sell it off and get the Combat model with the earth frame and threaded barrel. Who knows. I still have it listed for sale on a few forums for $650 and if I sell it then great I'll buy my M&P9 but till then I will order the conversion parts and some factory flush 18 round magazines. Seems like a true go-to gun for WTSHTF gun. Plus since I'm not MB and don't have a nice collection of .44s laying around I'll wait for the zombie hoards with sheer volume of fire. Between this my M&P45 my AR and my Compact M&P9 and now my .357 I think I'm covered. I just need KP to send me a Bren or something and I'll be set.