S&W Sc1911 probs.

[texcaliber]

Mr. Bane that is prob. the best.... no prob. about it IT IS THE BEST ADVICE i have recieved thank you for your time . S&W will be receiving my Sc1911 . I have to say though the Sig220 is going to stay even if its slidestop is wrong. Dryfire pratice is soooo much better w/sig.
Thanks to all for opinions.

[DonWorsham]

PS...Worsham, when you see me this weekend and buy me expensive designer beer, ask me why I recommended .44 Special revolvers for airline pilots!

Noted.

[kmitch200]

Mr. Bane that is prob. the best.... no prob. about it IT IS THE BEST ADVICE i have recieved thank you for your time . S&W will be receiving my Sc1911 . I have to say though the Sig220 is going to stay even if its slidestop is wrong. Dryfire pratice is soooo much better w/sig.
Thanks to all for opinions.

You will be very disappointed with S&W service if you can't explain WHAT problem you are having. "My gun jams" doesn't cut it.
You say "I kno the ejector is a prob with these guns." I don't think so...the EXTRACTOR has been suspect to those that can't stand an external extractor on a 1911. They have been used for 40 years or so on other Smith autos and seem to work fine. My Sig 1911 has an external extractor...no big deal. 

Once again, so the cheap seats can hear it -- WHAT IS YOUR GUN DOING WHEN IT "JAMS"?!?! 
Where is the empty case ending up? Where is the next cartridge ending up?
This may be something as simple as lube it properly and hold it firmly.

[Hazcat]

Noted.

Don, I think all of us would like to hear the answer to that one (44 sp revolver), so take good notes. 

[DonWorsham]

Don, I think all of us would like to hear the answer to that one (44 sp revolver), so take good notes. 

I just hope it can be repeated in mixed company! 

[Sponsor]

[Timmy Jimmy]

So where are you buying this beer and are the rest of us invited??

[DonWorsham]

So where are you buying this beer and are the rest of us invited??

Wher ever they sell PBR. That's a designer beer, right?

[Hazcat]

Wher ever they sell PBR. That's a designer beer, right?

Old Milwaukee 

[texcaliber]

Just to let yall know , i contacted S&W and was put through to the repair department . After telling the 1st person[girl] my problems she sounded as confused as I was/am . So my blood presure started to rise . I think she was in the same boat . Sooo long story short she got the head gunsmith on the line . I was honored . I gave him the same story as the girl expecting to here "not enough info" but that was not the case. He was very positive and seem to know what the problem or to be more exact problems were . THE REASON(S) FOR JAMMING WERE MOST LIKELY 1.ejector (which does have some movement) 2.extractor and 3.maybe just maybe from repeated jams may of caused a problem with the feeding from mag to chamber via a bur or something else. So needless to say S&W's customer service is AWSOME!!!!!
The problem will be fixed and the gun will be testfired 200 to 300 rounds just to make sure .
Now i asked is there anyway my 1911Sc would be reliable enough for my trust again and he promised it would or i would get a new one which was . That put me at ease .
By the way if i didnt say it before thanks to everyone for thier input. It help me out.