« previous next »
Pages: 1 [2]   Go Down

Author Topic: Never Had this happen  (Read 6195 times)

MikeBjerum

  • Top Forum Member
  • *****
  • Posts: 10938
  • DRTV Ranger
  • Liked:
  • Likes Given: 1051
Re: Never Had this happen
« Reply #10 on: January 31, 2013, 09:39:32 AM »
My plate has not made a noticeable change in 10 years.  I use a small pin to push the firing pin forward, and a small screwdriver to slide the stop down.  It slides back up into place with firm finger pressure.  The stop will stay in place through friction fit without the firing pin in place.

Saturday bath night* is just around the corner, so I will pay closer attention to this area and let you know if I come across anything I am missing or not remembering correctly.


*  Saturday bath night is what I call my Saturday evening ritual of maintaining my carry guns and accessories.  Every Saturday evening the three guns get stripped down and cleaned and lubed, the magazines get a complete cleaning, and ammunition gets cleaned up as well.

The J Frame is pretty simple, because this gun's life is mostly in the cubby hole of the pick up with limited pocket time; the 1911 has quite a pit of IWB holster time and the magazines get lots of pocket time; and the LCP and its magazines live in the pocket - If I have my pants on the gun is in them.

I could knit sweaters with the lint these things attract over time.  Even in leather it is shocking what and where you collect.  Also, many people do not understand the moisture our clothes collect and transfer to anything contained in them!
Logged
If I appear taller than other men it is because I am standing on the shoulders of others.

PegLeg45

  • NRA Life, SAF, Constitutionalist
  • Top Forum Member
  • *****
  • Posts: 13172
  • DRTV Ranger
  • Liked:
  • Likes Given: 1209
Re: Never Had this happen
« Reply #11 on: January 31, 2013, 05:35:53 PM »
I had it happen with my first 1911. It was an old military Colt and the firing pin got stuck in the breech-face pin hole like Ellis was talking about. A rat-tail file solved that issue.
I could see a 'possible' (but not probable) issue with the Colt Series 80 if the pin block system bound up while the pin was in the forward (primer strike) position of its movement, but too many things would have to happen at the same time for that.

As to the whole fit issue, I have never had to exert pressure to remove the firing pin stop on any of my 1911's.
Logged
"I expect perdition, I always have. I keep this building at my back, and several guns handy, in case perdition arrives in a form that's susceptible to bullets. I expect it will come in the disease form, though. I'm susceptible to diseases, and you can't shoot a damned disease." ~ Judge Roy Bean, Streets of Laredo

For the Patriots of this country, the Constitution is second only to the Bible for most. For those who love this country, but do not share my personal beliefs, it is their Bible. To them nothing comes before the Constitution of these United States of America. For this we are all labeled potential terrorists. ~ Dean Garrison

"When it comes to the enemy, just because they ain't pullin' a trigger, doesn't mean they ain't totin' ammo for those that are."~PegLeg

TAB

  • DRTV Rangers
  • Top Forum Member
  • *
  • Posts: 10174
  • Liked:
  • Likes Given: 97
Re: Never Had this happen
« Reply #12 on: February 01, 2013, 02:19:21 AM »
Fwiw  jmb  designed the 1911 so it could be completly field striped with parts of the gun/ 45 acp rounds/shells.   
Logged
I always break all the clay pigeons,  some times its even with lead.

les snyder

  • Top Forum Member
  • *****
  • Posts: 1010
  • Liked:
  • Likes Given: 0
Re: Never Had this happen
« Reply #13 on: February 02, 2013, 06:49:43 PM »
check that the firing pin spring is not reversed... one end is closed, and is designed to be held by friction to the firing pin...it will trap the firing pin forward (as will a tight firing pin hole) ....an oversized firing pin stop is a good addition, as it additionally keeps the extractor from rotating
Logged

gunman42782

  • Top Forum Member
  • *****
  • Posts: 917
  • Liked:
  • Likes Given: 0
Re: Never Had this happen
« Reply #14 on: February 06, 2013, 01:40:29 PM »
Got my new pin, spring, and plate from Midway, and shot the Colt again today with no issues. 
Logged
Life Member of the NRA

Sponsor

  • Guest
Re: Never Had this happen
« Reply #15 on: Today at 04:19:39 PM »
Logged

PegLeg45

  • NRA Life, SAF, Constitutionalist
  • Top Forum Member
  • *****
  • Posts: 13172
  • DRTV Ranger
  • Liked:
  • Likes Given: 1209
Re: Never Had this happen
« Reply #15 on: February 06, 2013, 01:50:40 PM »
Quote from: gunman42782 on February 06, 2013, 01:40:29 PM
Got my new pin, spring, and plate from Midway, and shot the Colt again today with no issues. 

Outstanding!!!  :D
Logged
"I expect perdition, I always have. I keep this building at my back, and several guns handy, in case perdition arrives in a form that's susceptible to bullets. I expect it will come in the disease form, though. I'm susceptible to diseases, and you can't shoot a damned disease." ~ Judge Roy Bean, Streets of Laredo

For the Patriots of this country, the Constitution is second only to the Bible for most. For those who love this country, but do not share my personal beliefs, it is their Bible. To them nothing comes before the Constitution of these United States of America. For this we are all labeled potential terrorists. ~ Dean Garrison

"When it comes to the enemy, just because they ain't pullin' a trigger, doesn't mean they ain't totin' ammo for those that are."~PegLeg

MikeBjerum

  • Top Forum Member
  • *****
  • Posts: 10938
  • DRTV Ranger
  • Liked:
  • Likes Given: 1051
Re: Never Had this happen
« Reply #16 on: February 06, 2013, 03:16:40 PM »
Great news!  Now you have a good gun, and the satisfaction of maintaining it yourself  ;D
Logged
If I appear taller than other men it is because I am standing on the shoulders of others.

tombogan03884

  • Guest
Re: Never Had this happen
« Reply #17 on: February 06, 2013, 07:21:46 PM »
BTDT  ;D
Logged
Pages: 1 [2]   Go Up
« previous next »
 

SMF spam blocked by CleanTalk