Author Topic: Spring Loaded Decappers  (Read 1276 times)

alfsauve

  • Semper Vigilantes
  • Top Forum Member
  • *****
  • Posts: 7183
  • DRTV Ranger
  • Liked:
  • Likes Given: 447
Spring Loaded Decappers
« on: May 04, 2020, 05:47:16 PM »
One of the most common ways we psych ourselves out is:  I'm the only one who has the problem.

When reloading .38spl the decapping pin would stick to the primer and pull it back into the primer pocket. 

While I was on hiatus I learned I'm not the only one.  It's such a common problem, Dillon makes resizing dies with spring loaded decapping pins.

I order just their .357 sizing die.  It works really well.

RCBS make spring loaded pins.  So I ordered a few.  Guess what, they don't fit my Hornady dies.  Hornady is about 7/32" while RCBS is 1/4"  No worries, Mate.  I got a 1/4"x28 tap a made them fit the Hornady collet.  Not that I need it for anything other than .357/.38, but in case I do I have a replacement decapper ready to go.

Will work for ammo
USAF MAC 437th MAW 1968-1972

tombogan03884

  • Guest
Re: Spring Loaded Decappers
« Reply #1 on: May 04, 2020, 05:58:45 PM »
Handy to know.
And it brings up another thing. In this day of repeatable , truly interchangeable parts , if YOU have problem X any others using the same product will experience the same performance.
It AIN'T just you   ;D

 

SMF spam blocked by CleanTalk