« previous next »
Pages: [1]   Go Down

Author Topic: Remington model 81  (Read 1759 times)

m25operator

  • Top Forum Member
  • *****
  • Posts: 2628
  • DRTV Ranger
  • Liked:
  • Likes Given: 0
Remington model 81
« on: October 17, 2009, 07:49:48 PM »
Hey group, been working on a Remington model 81, the successor to the model 8, for a friend of a friend, would not feed or accept rounds in the magazine. What a treat, what a cool old rifle. As I did my research, it was one of the first commercial semi-auto rifles. Removable barrel, with the browning recoil system, similar to the A5, but with a barrel shroud, to contain the recoil spring. The magazine was dented from the outside in, I made an iron to insert into the mag, to press the dents back out, and everything worked out fine. This is not a detachable mag, but looks like it. I had to assemble and disassemble several times, to get everything worked out, but it was a great experience, I am still humbled at what our fore bearers were able to accomplish and design with the equipment available at the time, not to mention how much our modern makers still, borrow from them. The trigger, sear, disconnector would look very much like an M1, M1a set up. I took the time to clean the action very well, as it was not overly, but pretty rusty. Not much original bluing left, but now is very slick in operation. I probably have 3 real hrs into it, but if the guy will buy me a case of beer, even. He is a police officer who got the rifle for free, and it was an experience in history.

Not to mention, I made a new tool, I can use later.
Logged
" The Pact, to defend, if not TO AVENGE '  Tarna the Tarachian.

twyacht

  • "Cogito, ergo armatum sum."
  • Top Forum Member
  • *****
  • Posts: 10419
  • DRTV Ranger
  • Liked:
  • Likes Given: 0
Re: Remington model 81
« Reply #1 on: October 17, 2009, 08:37:57 PM »
What is the approximate vintage? Sounds like a nice rifle. Things that were made well stand the test of time with some TLC.

Maybe a picture?

Take Care.

Logged
Thomas Jefferson: The strongest reason for the people to keep and bear arms is, as a last resort, to protect themselves against the tyranny of government. That is why our masters in Washington are so anxious to disarm us. They are not afraid of criminals. They are afraid of a populace which cannot be subdued by tyrants."
Col. Jeff Cooper.

tombogan03884

  • Guest
Re: Remington model 81
« Reply #2 on: October 17, 2009, 08:52:15 PM »
It's great when you get to work on something "special"
Logged

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 11241
  • DRTV Ranger
  • Liked:
  • Likes Given: 1549
Re: Remington model 81
« Reply #3 on: October 17, 2009, 09:12:54 PM »
What caliber? I may have some ammo for it. I've been holding onto a box of .32 Reminton for years. It needs a good home.
Logged
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

m25operator

  • Top Forum Member
  • *****
  • Posts: 2628
  • DRTV Ranger
  • Liked:
  • Likes Given: 0
Re: Remington model 81
« Reply #4 on: October 18, 2009, 12:13:17 AM »
It has been rechambered to .300 Savage, I believe the original loading was .30 Remington.

Here is a link with some verbage.

http://www.gunsandammomag.com/cs/Satellite/IMO_GA/Story_C/Remington+Model+81?packedargs=pagenum%3D3
Logged
" The Pact, to defend, if not TO AVENGE '  Tarna the Tarachian.

Sponsor

  • Guest
Re: Remington model 81
« Reply #5 on: Today at 02:46:41 AM »
Logged

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 11241
  • DRTV Ranger
  • Liked:
  • Likes Given: 1549
Re: Remington model 81
« Reply #5 on: October 18, 2009, 01:51:49 PM »
I checked wikipedia's model 8 page and it mentions the 81 too. They actually made some model 81's in .300 savage which I didn't know about. I thought it was only chambered for the 4 calibers that were introduced with the model 8 - .25, .30, .32, and .35 Remington.
Logged
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

shooter32

  • shooter32
  • Top Forum Member
  • *****
  • Posts: 2945
  • DRTV Ranger
  • Liked:
  • Likes Given: 41
Re: Remington model 81
« Reply #6 on: October 19, 2009, 10:33:39 AM »
Quote from: twyacht on October 17, 2009, 08:37:57 PM
What is the approximate vintage? Sounds like a nice rifle. Things that were made well stand the test of time with some TLC.

Maybe a picture?


Yeah, what tw said.  ;D
Logged
A government big enough to give you everything you want is a government big enough to take from you everything you have. ~ Gerald Ford - August 12, 1974
Pages: [1]   Go Up
« previous next »
 

SMF spam blocked by CleanTalk